[Sneap] FW: HVEC GVM Motor Bearings

[Krause, Bob]

-----Original Message-----
From: sneap-bounces at tunl.duke.edu [mailto:sneap-bounces at tunl.duke.edu]
On Behalf Of Krause, Bob
Sent: Monday, August 20, 2007 8:30 AM
To: Symposium of Northeastern Accelerator Personnel
Subject: Re: [Sneap] HVEC GVM Motor Bearings


The ATF-SNEAP 2006 meeting was held in Australia and information is
available at:
http://www.ansto.gov.au/nugeo/conference/private/ATF_SNEAP.htm

++++++++++++++++++++++++++++++++++++

The SNEAP 2007 meeting will be hosted by Brigham Young University in
Salt Lake City Utah. The meeting web site is located at:
http://webpub.byu.net/wsd/.

Chris,

For years I have used part number 608RS  IKS.  This identification is on
the bearing itself, both sides are sealed.  The box is identified with
the number 6-8038-7.  
I purchased them from BRC some years ago. The motor that these bearings
fit is a Roton series 329CS.  Hope this helps. 

Bob Krause
James R. Macdonald lab.
Kansas State University    

-----Original Message-----
From: sneap-bounces at tunl.duke.edu [mailto:sneap-bounces at tunl.duke.edu]
On Behalf Of Chris Westerfeldt
Sent: Friday, August 17, 2007 10:19 AM
To: Symposium of Northeastern Accelerator Personnel
Subject: [Sneap] HVEC GVM Motor Bearings


The ATF-SNEAP 2006 meeting was held in Australia and information is
available at:
http://www.ansto.gov.au/nugeo/conference/private/ATF_SNEAP.htm

++++++++++++++++++++++++++++++++++++

The SNEAP 2007 meeting will be hosted by Brigham Young University in
Salt Lake City Utah. The meeting web site is located at:
http://webpub.byu.net/wsd/.

_______________________________________________
Sneap mailing list
Sneap at daytona.tunl.duke.edu
http://daytona.tunl.duke.edu/mailman/listinfo/sneap