[Sneap] EN water cooling

[Krause, Bob]

In response to the question regarding the amount of water cooling needed
for the 

EN accelerator  cooling ( Belt charging system ). 

Here at Kansas State University before the installation of the our
pelletron system the water pressure 

at the entrance of the tank was approx. 70 PSI and the chilled water
temperature was 55 to 60 

degrees F.   I cannot tell you what the actual water flow was through
the cooling coil inside the

tandem due to the return pressure, etc.  I can tell you that our normal
return pressure in our chiller

system is  15 PSI.

 

Bob Krause

James R. Macdonald lab.

Kansas State University

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://daytona.tunl.duke.edu/pipermail/sneap/attachments/20080108/a773a746/attachment.html